The Slip On Duckbill Check Valve is installed over the end of a plain ended pipe to prevent back flow.

2 design options as follows:

- Flared model

- Flat bottom model

Choosing a Curved Bill or Straight Bill:

Curved Bill model - provides 50% more sealing area compared to the straight bill ended duckbill check valve, enabling a better tighter seal when debris are present. Does require a slightly higher cracking pressure to open the valve compared to the Straight Bill model.

- Straight Bill model - opens with minimal cracking pressure, if debris are present there is a high chance it will effect sealing performance.

 

Measure the Outside Diameter of your pipe to select the size you need. - Product sizing is dependant on the OD of your pipe.

- Available in a wide range of sizes.

- Available in different rubber materials such as Neoprene, NBR, EPDM, Viton etc - contact us for a quote.

- 12 months warranty on manufacturing defects only.

SKU DBCVSO
Brand Duckbill Check Valve - Slip On - EPDM
Data Sheet
Download

Be The First To Review This Product!

Help other Dewater Products Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category